AST 1206 self aligning ball bearings

Nlim (grease):12,000 rpm; Static load, C0:5.45 kN; Brand:NTN; f0:12.3; D:42 mm; Fatigue limit load, Cu:0.25 kN; Dynamic load, C:11.4 kN; ra max:1 mm; Characteristic inner ring frequency, BPFI:4.44 Hz; Max operating temperature, Tmax:110 °C;

Ca90 - Dynamic Thrust Rating (90 million revolutions)6:10300 lbf; Y2 - ISO Factor10:3.09; Ab - Cage-Cone Frontface Clearance:0.08 in; G2 - Heat Generation Factor (Rib-Roller End):26.3; Aa - Cage-Cone Backface Clearance:0.05 in; Cage Type:Stamped Steel; C90 - Dynamic Radial Rating (One-Row, 90 millio

L1:49 mm; N1:21 mm; Weight:1.7 kg; Designation of bearing:EX207G2L4; A1:27 mm; A:45 mm; S:18.8 mm; H1:19 mm; C0:15.2 kN; s1:36.3 mm;

r - Cup Backface To Clear Radius2:0.130 in; Bearing Weight:8.1 lb; db - Cone Backface Backing Diameter:3.58 in; da - Cone Frontface Backing Diameter:3.35 in; G1 - Heat Generation Factor (Roller-Raceway)10:147; T1 - Bearing Width:1.8125 in; D1 - Flange Outer Diameter:6 in; Cup Part Number:H715310-B;

Self Aligning:Self Centering; Flinger Material:Steel; Seal Type:Single Lip; Housing Coating:Powder Coat; End Cap Groove:Yes; UPC:782475892020; Bearing Bore Shape:Round; Bearing Locking Device:Concentric Clamp Col; Housing Material:Cast Iron; Flinger Type:Rubberized;

d1:77.6 mm; dc min:80 mm; B:28 mm; Characteristic inner ring frequency, BPFI:9.3 Hz; r1s min:1.5 mm; Characteristic cage frequency, FTF:0.42 Hz; Max operating temperature, Tmax:120 °C; d:60 mm; Characteristic outer ring frequency, BPF0:6.7 Hz; D:110 mm;

C0:4.78 kN; B:19.1 mm; J:95 mm; T min.:-20 °C; S:6.5 mm; s1:23.05 mm; N1:19 mm; d:12 mm; Designation of bearing:ES201G2T20; L1:38 mm;

Appropriate Locknut No.:HM 31/670; Weight:268 g; S:50.0 mm; L3:80.0 mm; i:66.0 mm; S1:22 mm; L2:21 mm; t1:7 mm;

L:320 mm; d:49.21 mm; Z:75.1 mm; C:35.1 kN; A:31 mm; Recommended tightening torque for set screw:16.8 Nm; Dz:100 mm; s1:25.8 mm; Designation of bearing:UC210-31G2T20; H:120 mm;

s1:24.6 mm; C:31.85 kN; B:49.2 mm; C0:20.8 kN; d:38.1 mm; S:19 mm; Designation of bearing:UCX08-24G2; Recommended tightening torque for set screw:8 Nm; A1:14.3 mm; N:18mm;

Cage Type:EM; Y2 - ISO Factor6:3.07; Cg - Geometry Factor8:0.0547; Reference Thermal Speed Rating (Grease):3700; da - Inner Ring Backing Diameter:88.000 mm; B - Outer Ring Width:31 mm; Reference Thermal Speed Rating (Oil)7:4600; UPC Code:087796360761; D:130 mm; Design Unit:METRIC;

Bore Size d:50 mm; Clearance:C3; Outside Ring Width B:16.000 mm; Features:O.D. Groove; Cr - Dynamic Load Rating:21.8 kN; Grease Reference Speed:8300 rpm; Weight:0.25 Kg; C0r - Static Load Rating:16.5 kN; Outside Diameter D:80.000 mm; Oil Reference Speed:12000 rpm;

C:25.7 kN; S:17.5 mm; T min.:-20 °C; J:129 mm; T max.:100 °C; H2:91.5 mm; Dz:80 mm; Designation of bearing:UC207-20G2L4; L:166 mm; A:44.5 mm;

C90 - Dynamic Radial Rating (One-Row, 90 million revolutions)3:1700 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:1170 lbf; Cup Part Number:07205; C - Cup Width:0.5000 in; Bearing Weight:0.7 lb; e - ISO Factor8:0.4; Ab - Cage-Cone Frontface Clearance:-0.07 in; Db - Cup Backface Backing

r:1.1; G:5/16-24UNF; T max.:100 °C; Recommended tightening torque for set screw:8 Nm; C:20 mm; S:17.5 mm; D:72 mm; m:6.5 mm; Weight:0.48 kg; T min.:-20 °C;